EEPM-CIR800

Feature :

1. Round type and radiate magnetic poles, suitable for clamping round type and any form of workpiece machining
2. Workpieces can be touch to all poles of Magnetic Chuck, super power magnetic force as minimum of 1600Kgf (1.6 tons) ±5% and maximum of 4400Kgf (4.0 tons)±5%, it depends on size of workpiece and magnetic chuck.(Please refer to the spec. list).
3. 1 ~ 10 seconds control for power ON & OFF. No electric power supply required to keep the magnetic chuck ON, cable can be taken off for turning chuck freely while machining.
4. Un-obstructed movement of cutters during machining, the really functions of 5 side machining on workholding.
5. Design of Electric-Permanent, never gets temperature to effect the accuracy of workpieces.

Applications

1. Suitable in use for combine with Vertical Lathe, CNC 5 Axis Index Device, CNC 5 Axis Machining Center ...etc.
2. Minimum dimension of workpiece required as:
3. EEPM-CIR300-Ø300mm; EEPM-CIR400-Ø360mm; EEPM-CIR 500-Ø500mm or same dimensions of any other forms of workpiece.
4. More functions for cooperate with induction plate, can do positioning on workholding.

Option Accessories-Induction Block

1. Induction Block EEPM-CIRIB series are use with EEPM-CIR chucks, can be increased to more functions on workholding.

2. Convenience and Accuracy: Induction Block are interchanging & consuming accessories, you can machining surface or forming induction blocks for the workpiece required by the machine directly, so the parallelism of induction block will always 100% match to the machine.

Option Accessories-T Fixed Slide Block

1. T-fixed slide block can do base points for workpiece positioning.

2. Due to the holding surface of small workpiece is not big enough, so please always use the T fixed slide Block to avoid the workpiece moving when machining.